42 ? nic components corp. www .niccomp. com www .lowesr. com www .rfpassives. com www .smtmagnetics. com nspe-u series hybrid aluminum electrolytic capacitors rated voltage range 6.3 ~ 16vdc rated capacitance range 22 ~ 560 f operating temp. range -55 ~ +125c capacitance tolerance 20% (m) max. leakage current after 2 minutes @ 20c see speci cations tables working and surge voltage ratings w.v. (vdc) 6.3 10 16 s.v. (vdc) 8.2 13 20 tan @ 120hz/20c 0.18 0.16 0.14 impedance ratio z -55c/z +20c 1 ~ 2.5 z +125c/z +20c 0.5 ~ 1.0 load life test @ 125c and rated voltage w.v. (vdc) 6.3 10 16 case dia. 8 & 10mm 2000 hrs. capacitance change within 30% of initial measured value tan and esr less than 200% of speci ed max. value leakage current less than speci ed max. value esr less than 200% of speci ed max. value characteristics ? cylindrical v-chip construction for surface mounting ? high temperature range (+125c) ? ultra low esr and high ripple current ? 8x10.8 ~ 10x10.8mm case sizes ? reflow soldering rated to +260c (see re ow speci cations) rohs compliant includes all homogeneous materials *see part number system for details part number cap. ( f) working voltage case size (d x l) mm max. tan 120hz/20c max. esr ( a) after 2 min.* max. esr (m ) at 100khz/20c max. ripple current (ma rms) at 100khz/125c load life hours (+125c) nspe-u391m6.3v8x10.8lbf 390 6.3 8x10.8 0.18 492 17 1780 2000 nspe-u471m6.3v10x10.8lbf 470 10x10.8 0.18 593 16 2190 2000 nspe-u561m6.3v10x10.8lbf 560 10x10.8 0.18 706 16 2190 2000 nspe-u101m10v8x10.8lbf 100 10 8x10.8 0.16 200 20 1680 2000 nspe-u221m10v8x10.8lbf 220 8x10.8 0.16 440 18 1680 2000 nspe-u391m10v10x10.8lbf 390 10x10.8 0.16 780 17 2060 2000 nspe-u220m16v8x10.8lbf 22 16 8x10.8 0.14 100 28 1380 2000 nspe-u330m16v8x10.8lbf 33 8x10.8 0.14 106 26 1380 2000 nspe-u470m16v8x10.8lbf 47 8x10.8 0.14 151 24 1380 2000 nspe-u680m16v8x10.8lbf 68 8x10.8 0.14 218 22 1380 2000 nspe-u101m16v10x10.8lbf 100 10x10.8 0.14 320 19 1850 2000 standard products and case sizes d x l (mm) cap. f 100hz 1khz 10khz 100khz c < 10 0.05 0.20 0.50 1.00 ripple current frequency correction factors precautions please review the notes on correct use, safety and precautions found on pages t10 & t11 of nic?s electrolytic capacitor catalog . also found at www.niccomp.com/precautions if in doubt or uncertainty, please review your speci c application - process details with nic?s technical support personnel: tpmg@niccomp.com nspe-u 391 m 6.3v 8x10.8 l b y f rohs compliant sn-bi finish, 13" reel re ow temp. code (n=+260c) size in mm working voltage tolerance code m=20% capacitance code in f, rst 2 digits are signi cant third digit is no. of zeros, ?r? indicates decimal for values under 10 f series part number system optional: suitable for automotive equipment, sourced to special production and inspection at ts-16949 certi ed production site for automotive applications see part numbering system *please review typical leakage current performance, as shown on nic load life endurance test report.
43 ? nic components corp. www .niccomp. com www .lowesr. com www .rfpassives. com ww w.smtmagnetics. com nspe-u series hybrid aluminum electrolytic capacitors land pattern dim. (mm) + - aa p b case dia. a b p 8 4.1 2.1 2.8 10 4.4 2.5 4.3 t a p feeding + - 1.5 ? +0.1/- 1.75 d b c 1.5 +0.1/-0 1.75 + 0.15 t 4 + 0.1 case size a 0.5 b 0.5 c 0.3 d 0.1 p 0.1 t 0.2 t max. 8x10.8 8.7 8.7 24.0 11.5 16.0 11.0 0.6 10x10.8 10.7 10.7 24.0 11.5 16.0 11.0 0.6 case size w 1.0 qty per reel 13" (330mm) 8x10.8 26 300 10x10.8 26 300 reel dimensions (mm) taping specifications (mm) 1. both leader and trailer tape: minimum 40mm (1.57") empty carrier tape pockets. 2. leader tape: approximately 20cm of cover tape at leader. 3. connection: maximum 3 connections (slices) per reel. 2mm 0.5mm 13mm 0.5mm 21mm 0.8mm 330mm 2.0mm or 380mm 2.0mm 50mm min. w 3mm part marking capacitance value voltage lot code series code 220 10v u__ dimensions (mm) 0.3mm max. d l case size d 0.5 l max. a, b 0.2 w i 0.2 p 0.2 8x10.8 8.0 10.8 8.3 0.7 ~ 1.0 2.9 3.2 10x10.8 10 10.8 10.3 1.0 ~ 1.4 3.2 4.6 + - i i w p a b diameter preheat (120 sec. max.) time above 200c time above 230c peak temperature number of re ow passes 6.3 ~ 10mm 150c ~ 190c 90 sec. max. 40 sec. max. 250c/5 sec. 2x* 150c ~ 180c 60 sec. max. 40 sec. max. 260c/5 sec. 1x peak temperature and duration recommended reflow soldering profile time above 200c (see table below) 50 100 150 200 time (seconds) temperature - deg. c preheat - 120 seconds max. (see table for temperature) peak temperature (see table below) 250 230 time above 230c (40 seconds max.) *two re ow passes are permissible with a cool down to room temperature required between the rst and second pass.
|